Events
September 2010
S M T W T F S
 1234
567891011
12131415161718
19202122232425
2627282930EC
October 2010
S M T W T F S
 12
3456789
10111213141516
17181920212223
24252627282930
31EC
November 2010
S M T W T F S
 123456
78910111213
14151617181920
21222324252627
282930EC

Archive for the ‘Our Log Home’ Category

PostHeaderIcon My First Big Project: Attack The Deck

Our back deck has three sets of stairways, one on each side, that give us easy access to the whole back yard.  About a week ago, I was walking down one of them and the handrail had literally popped out.  The wood was rotting and the nails that were used 19 years ago no longer hold and whooosh!  I nearly fell flat on my face.   So just 4 months into homeownership, let the major repairs begin!

There was no way I was going to pay someone to do this.  I am the MAN of this house and I’m going to do it or destroy the deck trying.  Besides, we were already aware that the deck railings are no longer up to code, so it’s a good time to see if I can repair this section.   If it goes well, I’ll replace the rest of the deck railings in the spring.

First was removing the old section.  Most of it was easy to tear apart because there was a lot of wood rot.  But the bottom of the posts were all in good shape, so it took some work to get them removed.  Since the stairway actually covered one of the post bolts that secured it, I decided to make a notch in the stairway to get access to it.   Done!  Next is to buy all the materials.

That was harder than I thought.  I measured every piece I wanted to replace and found that nothing matched up with the wood in stock at Home Depot.  My best guess is that over 19 years, wood shrinks or something, so it’s not going to match up.   Time to talk to the guy in the lumber dept.   He was actually super helpful and after 3 hours of questions, looking around and thinking, I had everything I needed to get the job done.

The posts were surprisingly easy to reinstall.  I needed to drill holes in the top stairway post to match the existing bolt holes in the deck so I could anchor it.  With a little common sense, I got it done and they were perfect.  Wow, that seems rare, but I’m glad it worked out.

Next, I assembled the mid-section rails that hold the spindles.  It turned out GREAT!  Far better than I expected and I got a chance to pull out my light-duty air compressor and use my finish nail gun to tack the railing in place and secure the spindles.  Then, finish securing the whole thing with deck screws.  All done and it looks excellent.

Next will be the top railing,  which I haven’t done yet.  Last would be to stain and re-coat and enjoy.  I’ll give an update when it’s done.

  • Share/Bookmark